High-Quality, Durable Rugs Made in the USA with Obsessive Attention to Detail & FREE Shipping!

Where to Send Cow Hide to Be Tanned

The first step in tanned leather preparation is to prepare the hide by freezing or salting it. Since refrigeration is not possible, salt seems to be the only option for skinned animal hides. Some sources recommend that salting is not necessary but some suggest that salting the hide thoroughly can ruin the hide. Salting can be either dry or wet. Adding a generous amount of salt can also damage the hide.

Dry salting

There are several advantages of dry salting cowhide. This method is safe, easy to use, and widely available. The main disadvantage is that it requires large amounts of salt, and requires a lot of time to rinse and rehydrate the raw stock. Additionally, the spent salt has a high salinity pollution load and is full of bacteria. It is not recommended to reuse the salt. Using a machine to dry salt cowhide is an alternative.

The hide is placed flesh-side up in a sheltered area. The salt is spread evenly over the entire surface. A wooden container is best, as the salt will stain metal. One or two hides can be stored safely in a five-gallon bucket, while a large pile can fit into a garbage can. After a week, the salt should be completely removed from the hide. After this period, the skin is ready for equine-friendly use.

Chromium tanning

Chromium tanning of cowhide can be done in three steps. The first step is to pickle the hide, which increases its acidity. This will help chromium tanning salts penetrate the hide. It will also prevent excessive swelling of the skin, extending its life. Finally, an antifungal and fungicide are added to prevent the hide from rotting. These steps are performed in several separate factories.

The process of chromium tanning can cause several problems for the environment. For starters, chromium is a metal. Fortunately, it can be extracted from leather and recycled. It can also be harmful to the environment because of its toxicity, but it’s worth a try. It also produces more durable leather. Chromium is present in nearly 97% of the fiber of leather, but it’s harmless in most circumstances.

Lard and flour method

This process is very similar to the one used by Native Americans. The hide is first fleshed with a drawknife or dull hacksaw blade. The hide is then rubbed on it with either a cool or hot solution. The hot method is better because the brains will dissolve the hair from the hide. Another method that is similar to the lard and flour method is rubbing the hide with a thick layer of lard. Then, it is coated with flour. After the hide has been rolled, it is rubbed in this mixture until blood is drawn out.

The Lard and flour method for tanning cowhide is also known as the traditional method. It is the simplest and most economical method of tanned cowhide. Rawhide is rolled between two rollers and immersed in a solution of 100% water heated to 50 degrees Celsius. Then, a mixture of six ounces of lead or arsenic soap is mixed with the mixture and rubbed into the hide.

Bark tanning

If you are wondering where to send a cowhide for bark tanning, then you have come to the right place. While traditional tanners use animal hides, you can also send them for bark tanning as a more environmentally friendly option. The tanning process uses natural plant ingredients to turn hides brown, but the process takes months. Using this method, your cowhide is left in tannin water for months.

To prepare cowhide for bark tanning, you will need to find a supplier that specializes in this process. Most reputable companies will provide the necessary tools to help you make a beautiful, healthy hide. Besides the hide itself, you will need a wooden, plastic, or masonry container. The larger container will allow for a greater amount of solution and a better tan. The hide should also be hung over sticks to minimize wrinkles and folds. You can also use crossbars to help the hide get a more even tan.

styling cowhide rugs

Updating…
  • No products in the cart.