How to Paint Wood Furniture Rustic White
If you have a piece of wood furniture that has been looking tired, you might wonder how to paint it in a rustic white color. This article will cover several methods to achieve the same result. In this article, we will discuss how to use a sanding block, chalk-type paints, and a latex glaze. Read on to learn more! Listed below are some steps you can take to achieve the look you want.
Dry distressing
There are a few different methods to distress your wood furniture. The most popular method is wet distressing, which is a naturally faded finish that can give your pieces a vintage look. This method requires several coats of paint, which you must break through using a scouring pad or wet sanding paper. This method is ideal if you’d like to achieve a subtle effect without overstressing the piece.
Using sanding sponges
If you are planning to distress the wood furniture you have bought, you can try using a sanding sponge. This can be a lot of fun, but you need to make sure that the sanding sponge is clean before you use it. If you don’t have one, you can buy one for a couple of dollars at a home improvement store. This method will give your wood furniture a distressed look and add some character to it.
Using chalk-type paints
If you’re looking to paint your wood furniture in rustic white, chalk-type paints are a great choice. This type of paint works well on cheap laminate furniture and doesn’t need any additional pre-treatment. You can use it on both new and used furniture and even on cheap laminate. Listed below are some tips for applying chalk paint to your wood furniture. Listed below are some steps to follow:
Using a latex glaze
Adding a latex glaze to your painted wood furniture will help it look rich and add a subtle whitewash. You can use a paintbrush or foam brush to apply the glaze and then wipe off any excess with a lint-free rag. To make blending the glaze easier, apply a thin layer of the paint to a clean surface. Apply more glaze if needed.
Sealing painted furniture
You can seal painted wood furniture rustic white using water-based sealers. You will want to start at one side of the piece and work your way to the opposite side and allow the sealer to dry before you apply it to other parts of the piece. You should shake the spray can before use, and hold it at an angle of about eight inches and upright to avoid splattering. You will also want to follow the instructions on the label to prevent wrinkles in the final sealer.
